razertip

The 4 inch Inlet Hose Adapter allows attachment of other accessories including the lap-top tray ZA440. It can be used to collect dust from shop to...

Razertip 45-degree Shader (Series 16)A very useful general-purpose shader, it is recommended in several popular pyrography books and articles, incl...

Exhaust air discharges from the side of the Razaire 530. This adapter slips down over the exhaust, re-directing the air towards the back of the uni...

Activated Charcoal Standard 30% Efficient (gray) filter. It is often used as a second stage to reduce odours, such as burning wood, antlers, and eg...

Adapts Detail Master or similar pen (1/4" phone plug) to a Razertip power supply.

Adapts Razertip pens to Colwood, Nibs, Optima or Burn Master burners.

Ball Stylus (Series 99) 0.4mm (1/64")A 1/64" Steel ball fused onto this tip gives a perfect writing or burnishing point. It is ideal for fine shadi...

Ball Stylus (Series 99) 0.8mm (1/32"). A 1/32" Steel ball fused onto this tip end is great for shading, burnishing, or drawing. Holds heat extremel...

Ball Stylus (Series 99) - 1.2mm (3/64"). A 3/64" steel ball on the tip for larger areas. The bigger the ball, the longer it takes to heat and cool ...

Ball Stylus (Series 99) 1.5mm (1/16"). A 1/16" Chrome steel ball fused onto this tip end is great for shading, burnishing, or drawing. Holds heat e...

Ball Stylus (Series 99) 2.0mm (5/64"). A 5/64" Chrome steel ball fused onto this tip end is great for shading, burnishing, or drawing. Holds heat e...

Ball Stylus (Series 99) - 2.3mm (3/32"). A 3/64" chrome steel ball welded onto the end of the tip when burnishing, shading, or drawing larger areas...

Ball Stylus (Series 99) - 3.0mm (1/8"). A 1/8" Steel ball on tip end is great for burnishing, shading, or drawing. Holds heat well giving more cons...

Ball Stylus (Series 99) - 3.9mm (5/32"). A 5/32" Steel ball on tip end is great for burnishing, shading, or drawing. Holds heat well giving more co...

Ball Stylus (Series 99) - 4.7mm (3/16"). A 3/16" Steel ball on the tip end is great for burnishing, shading, or drawing. It holds heat well, giving...

Ball Stylus (Series 99) - 5.5mm (7/32"). A 7/32" Steel ball on the tip end is great for burnishing, shading, or drawing. It holds heat well, giving...

Ball Stylus (Series 99) - Tip Sets. Chrome steel balls welded onto the end of the tip give excellent heat retention (better as the ball is bigger)....

Bead Maker - 3 Piece Set, includes 3.0mm (7/64"), 4.7mm (3/16") and 6.00mm (15/64") standard pens. Used to "push" material down, leaving a round ra...

Bead Maker - 3.0mm (0.1181" - approximately 7/64") wide. It is used to "push" material down, leaving a round raised "bead" on any surface. It is ve...

Bead Maker - 4.7mm (0.1850" - approximately 3/16") wide. It is used to "push" material down, leaving a round raised "bead" on any surface. It is ve...

Bead Maker - 6.0mm (0.2362" - approximately 15/64") wide. It is used to "push" material down, leaving a round raised "bead" on any surface. It is v...

Contains 8 of our most popular birdcarver heavy duty tips.For use with our Binding-Post Interchangeable-tip Pen #BPH.TH1S - Heavy Duty Small Skew. ...

Heavy Duty Bird Carver's Micro Tips - 5 piece set. Contains 5 of our smallest fine detail tips - Small Skew #1S, Small Round #2S, Small Spear #5S,...

Bird Carver's Micro Tips - 5 piece Set. Contains 5 of our smallest fine detail tips - Small Skew #1S, Small Round #2S, Small Spear #5S, Small Chise...